/* 
 * (C) Copyright 1992, ..., 2005 the "DOSEMU-Development-Team".
 *
 * for details see file COPYING in the DOSEMU distribution
 */

/* This is a C implementation of the BIOS memory setup. The int vector
   table and variables at 0040:xxxx are initialized. */

#include "emu.h"
#include "config.h"
#include "bios.h"
#include "memory.h"
#include "hlt.h"
#include "int.h"
#include "iodev.h"
#include "emm.h"
#include "xms.h"
#include "hma.h"
#include "ipx.h"

/*
 * install_int_10_handler - install a handler for the video-interrupt (int 10)
 *                          at address INT10_SEG:INT10_OFFS. Currently
 *                          it's f800:4200.
 *                          The new handler is only installed, if the bios
 *                          handler at f800:4200 is not the appropriate on
 *                          that means, if we use not mda with X
 */
static void install_int_10_handler (void)
{
  unsigned char *ptr;
  
  if (config.vbios_seg == 0xe000 && config.vbios_post) {
    ptr = (u_char *)((BIOSSEG << 4) + ((long)bios_f000_int10ptr - (long)bios_f000));
    *((long *)ptr) = 0xe0000003;
    v_printf("VID: new int10 handler at %p\n",ptr);
  }
  else
    v_printf("VID: install_int_10_handler: do nothing\n");
}

/* 
 * DANG_BEGIN_FUNCTION bios_mem_setup
 * 
 * description:
 *  Set up all memory areas as would be present on a typical i86 during
 * the boot phase.
 *
 * DANG_END_FUNCTION
 */
static inline void bios_mem_setup(void)
{
  int b;

  video_mem_setup();
  printer_mem_setup();

  /* show 0 serial ports and 3 parallel ports, maybe a mouse, game card and the
   * configured number of floppy disks
   */
  CONF_NFLOP(configuration, config.fdisks);
  CONF_NSER(configuration, config.num_ser);
  CONF_NLPT(configuration, config.num_lpt);
  if (config.mouse.intdrv)
    configuration |= CONF_MOUSE;

  configuration |= CONF_GAME | CONF_DMA;

  if (config.mathco)
    configuration |= CONF_MATHCO;

  g_printf("CONFIG: 0x%04x    binary: ", configuration);
  for (b = 15; b >= 0; b--)
    g_printf("%s%s", (configuration & (1 << b)) ? "1" : "0", (b%4) ? "" : " ");
  g_printf("\n");

  WRITE_WORD(BIOS_CONFIGURATION, configuration);
  WRITE_WORD(BIOS_MEMORY_SIZE, config.mem_size);	/* size of memory */
}

static void bios_setup(void)
{
  int i;

  /* initially, no HMA */
  set_a20(0);

  /* init trapped interrupts called via jump */
  for (i = 0; i < 256; i++) {
    if (config.vga && !config.vbios_post) {
      uint16_t seg, off;
      uint32_t addr;

      seg = int_bios_area[i] >> 16;
      off = int_bios_area[i] & 0xffff;
      v_printf("int0x%x was 0x%04x:0x%04x\n", i, seg, off);
      addr = SEGOFF2LINEAR(seg, off);
      if (addr >= VBIOS_START && addr < VBIOS_START + VBIOS_SIZE) {
	g_printf("Setting int0x%x to 0x%04x:0x%04x\n", i, seg, off);
	SETIVEC(i, seg, off);
	continue;
      }
    }

    /* interrupts >= 0xc0 are scratch (BIOS stack), 
       unless defined by DOSEMU */	
    if ((i & 0xf8) == 0x60 || (i >= 0x78 && i < 0xc0)) { /* user interrupts */
	/* show also EMS (int0x67) as disabled */
	SETIVEC(i, 0, 0);
    } else if ((i & 0xf8) == 0x68) {
	SETIVEC(i, IRET_SEG, IRET_OFF);
    } else if (i < 0x78 || i == 0xe6 || i == 0xe7) {
	SETIVEC(i, BIOSSEG, INT_OFF(i));
    }
  }

  /* Let kernel handle this, no need to return to DOSEMU */
 #if 0
  SETIVEC(0x1c, BIOSSEG + 0x10, INT_OFF(0x1c) +2 - 0x100);
 #endif

  SETIVEC(0x16, INT16_SEG, INT16_OFF);
  SETIVEC(0x09, INT09_SEG, INT09_OFF);
  SETIVEC(0x08, INT08_SEG, INT08_OFF);
  SETIVEC(0x70, INT70_SEG, INT70_OFF);
  SETIVEC(0x1e, INT1E_SEG, INT1E_OFF);
  SETIVEC(0x41, INT41_SEG, INT41_OFF);
  SETIVEC(0x46, INT46_SEG, INT46_OFF);

  /* This is an int e7 used for FCB opens */
  SETIVEC(0xe7, INTE7_SEG, INTE7_OFF);
  /* End of int 0xe7 for FCB opens */

#ifdef IPX
  /* IPX. Dummy but should not crash */
  if (config.ipxsup)
    SETIVEC(0x7a, BIOSSEG, INT_OFF(0x7a));
#endif

  /* Install new handler for video-interrupt into bios_f000_int10ptr,
   * for video initialization at f800:4200
   * If config_vbios_seg=0xe000 -> e000:3, else c000:3
   * Next will be the call to int0xe6,al=8 which starts video BIOS init
   */
  install_int_10_handler();

  {
    /* update boot drive in Banner-code */
    u_char *ptr;

    ptr = (u_char *)((BIOSSEG << 4) + ((long)bios_f000_bootdrive - (long)bios_f000));
    *ptr = config.hdiskboot ? 0x80 : 0;
  }

  bios_mem_setup();		/* setup values in BIOS area */
  iodev_reset();		/* reset all i/o devices          */
  ems_reset();
  xms_reset();
  _AL = DOS_HELPER_COMMANDS_DONE;
  while (dos_helper());		/* release memory used by helper utilities */
  boot();			/* read the boot sector & get moving */

  fake_retf(0);
}

void bios_setup_init(void)
{
  emu_hlt_t hlt_hdlr;

  hlt_hdlr.name	      = "BIOS setup";
  hlt_hdlr.start_addr = 0x07fe;
  hlt_hdlr.end_addr   = 0x07fe;
  hlt_hdlr.func	      = (emu_hlt_func)bios_setup;
  hlt_register_handler(hlt_hdlr);
}